Plug-in Motion Sensor is Not Working – K4Connect Support Center

If your plugin motion sensor is not working:

Make sure it's plugged into a working outlet
Check to see if it's plugged into is a switched outlet.
- Some outlets are wired so that the top part of the outlet is operated by a wall switch so that a lamp can be plugged in and operated by the wall switch. If the motion sensor is plugged into a switch-operated outlet, it will not work when the switch is off.
Make sure the motion sensor is plugged in at a location where motion can be detected. The range of the motion sensor is 12 ft. in a 90° angle from the sensor

If you're still having trouble with the sensor, please reach out to our Support team for assistance

Need help? Our friendly Support Team is here to assist you.

💬 Chat

Click the Chat icon in the bottom-right corner of your screen to start a conversation with a support representative.

📱 Phone & SMS*

Call or text us at (855) 876-9673.

📩 Email

Send us an email at support@k4connect.com, and we'll get back to you as soon as possible.

If you're unsure which contact method to use, chat is usually the fastest way to get assistance.

*K4Connect provides customer-initiated text message support. By texting K4Connect Support, you consent to receive text messages from K4Connect related to your support request, including responses and follow-up messages. Opting in is not a condition for purchase or service.

K4Connect does not send unsolicited or promotional text messages. Message frequency varies based on your support needs. Message and data rates may apply. Reply STOP at any time to opt out of support text messages.